Not usually something that crosses my radar being a committed earring freak, strangely I had a sudden urge a couple of weeks ago to make some bangles. I made the first one at night school as I needed something to do in the last couple of weeks that wouldn't take too long. I enjoyed making it - it was a hammered round bangle made from 2.6mm copper wire which I soldered three coils of thinner wire to.
I soon discovered that soldering the coils onto it meant I couldn't reshape it. I used paste solder for the coils as I thought it would be easier but two attempts and some burnt blobby messes later I went back to sheet solder which worked. In the meantime the bracelet had been bent out of shape slightly plus it needed a good hammering to work harden it as it was a little "bendy" having been well annealed with my soldering attempts!
So having learned what not to do - I never got on with paste solder so why I used it I don't know! - I bought a bracelet mandrel and made a few more -
They are made from 2.6mm and 3.25mm copper wire and are textured with a hammer and stamped designs. Really fun and easy to make.
The twisted wire bangles were a bit more work. I rolled the wire through the rolling mill at college then twisted the flattened wire using a vice and big pair of pliers. Matching the join and soldering was a challenge - I discovered that wedging the solder in the join was the best bet as it had a habit of sliding round the twist as I started to heat up the wire. Thinking about it now pick soldering the join probably would've been a better option and even easier!
No comments:
Post a Comment