Rolling Mill Textures - Leaf Skeletons

Last time I blogged about the Durston rolling mill I'd just bought. I love it. I haven't had a chance to really have a play with it yet thanks to being busy with orders (which is a good thing!) But I hope to have a good old go on it soon. I received some textured cards today from Rolling Mill Resource, a wonderful shop on Etsy. The cards are specially textured for use with a rolling mill or metal clay and are available in lots of cool designs and sizes. Here's one of the designs I choose.....

I was really pleased to see that the shop owner Tracey Perseverance Johnson had included a couple of extra patterns too which was very kind of her. So I'm slowly collecting textures to try with the rolling mill. I have some brass texture plates and some very fine netting (it's probably got a proper name but I'm no seamstress so haven't got a clue!) I also have a couple of embossing folders that you use to add raised texture and patterns to paper and card. They are made of sturdy plastic and if I can cut them so they fit the width of my rollers I'll have a go with those too. I'm also interested to see what twisted wire looks like when flattened. So I think I'm going to enjoy experimenting with my favourite piece of machinery :D

I did try some copper and sterling silver with the leaf skeletons I've had for a while and here's what I made with the results...

A pair of simple studs in oxidized finish. I love these and must make myself a pair! I also made a pair in a bright silver finish too. 

Copper leaf earrings with tube set stabilized turquoise and fine silver balls. I'm still finding tube setting a challenge as I think I'm a bit gung-ho with the grinding of the seat and struggle a bit to get the stone to fit sometimes without a lot of trying the fit and re-doing the grinding bit then making a mess and having to start again! I was the same with cabochon setting at first but I got there in the end. Tube setting is supposed to be "easy" according to some people. One day I will be one of those people  :D

A sterling silver leaf pendant with tube set moonstone. I love moonstone. It goes really well with oxidized silver and this tube setting was easy to do compared to the copper earrings which gave me a false sense of security.....but not for long!

 I will post more on rolling mill textures as soon as I get a chance.

Silver And Copper Bangles With Coils

My continuing love for making bangles now includes bangles with added coils. It's one of the things I attempted with the very first bangle I made a few months ago....

I tried to solder the coils using paste solder on this one as I thought it would be easier but it just didn't work - the paste solder just burnt and formed a lump and refused to flow so I went back to using strip solder. That worked better but positioning the tiny pallions was a bit tricky "back then" and I ended up with a bangle a little bit out of round.

Since then I've learned to pick solder which makes life so much easier! Pick soldering is basically melting the solder into a ball which will then stick to your soldering pick meaning you can position it in tricky spots more easily. Once your metal is up to the correct temperature you place the ball of solder on the join and it flows immediately (in theory!) It doesn't always flow immediately but it will stay in place and is a much quicker way to solder than positioning small pieces of strip solder on an awkward join then watching them slide off as the flux bubbles. I use this method to solder all my bangle joins and to solder on the coils on my new bangles.

 The oxidized sterling silver version three of which I am (yes I really am) going to make for myself "soon" and a copper and silver version...

Excitement Alert!!
I'm very pleased to announce I am now the proud owner of a rolling mill. Yes! I have one at last and it's a Durston! Ever since I discovered rolling mills and what you could do with them I have coveted one but a look at the prices soon changed my mind and I made do with other ways of texturing my metal. I have been using the rolling mill at the night class I go to but the rollers aren't properly aligned so you only get half a texture most of the time. I did ask the teacher if it could be sorted but apparently they can't fix it so that kind of pushed me into thinking about getting my own rolling mill.

It was then a case of arguing with myself over whether to get one of the cheaper versions or to splurge and go for a Durston. I didn't want to get a cheaper one and regret it but the Durstons are so expensive and I didn't know where I was going to put it when I was using it or where it would go when I wasn't. Not having a workroom or bench causes problems like this! I don't have anywhere to fix it permanently but decided to worry about that when it arrived. So I went for a Durston in the end as a reward for not smoking for over a year now. I'm slightly embarrassed to admit I smoked in the first place to be honest as it's such a stupid thing to do but I've stopped and I feel so much better for it plus I've saved myself over £2,500 that would have gone on fags in the last year or so. So spending nearly £400 on a rolling mill was sweetened a little by that thought at least.

Here it is - I solved the fixing it in position problem by using two G-clamps and attaching it to the worktop in the kitchen. That really is the only place I can use it but it's very sturdily fixed and quite safe to use. I need to open the cupboard door to attach the clamps but I didn't think you would want to see the contents of my cupboard :D

It works wonderfully evenly and I've tried out a couple of leaf skeletons on copper and silver which came out really well. I know it's going to get a lot of use and I am thinking of selling textured copper discs in the future too.
As for somewhere to keep it when I'm not using it or gazing at it lovingly... I have acquired part of another cupboard in the sideboard. Me and my jewellery making equipment are slowly taking over.........